Apricus-Aqua Unibox Solar Drive 0.55kW 230V 1P
New
New to the solar water pumping market, the Apricus-Aqua Solar Drive is not a conventional variable frequency drive. Furthermore which is used to power motors and pumps powered from the sun. Our Apricus-Aqua Solar Drive is an intelligent power converter that adapts available solar power to the required power levels and type, needed to power conventional pumps and motors.
APRICUS Aqua Installation manual https://apricus-aqua.com/
https://www.youtube.com/watch?v=YBBNtr5Nu_0
Designed For New World Markets
The Apricus-Aqua Unibox Solar Drive 0.55Kw 230V 1P is designed to power any single phase motor. It can power standard induction motors or synchronous permanent magnet motors. Apricus-Aqua Solar Drive is used to provide water to remote locations by using standard serviceable borehole and pump equipment. Adapting DC power from a solar array to AC power to operate standard motors.
Ease Of Use
This controller provides power control, motor and pump fault detection and soft starting characteristics. These Solar Drives are designed to provide these features together with ease of installation. The Apricus-Aqua Solar Drive is designed with the market, customer, economic conditions with state of the art technology. Years’ of experience was taken into consideration. Does not require you to change you existing pump and motor. If you already have a pump and it’s been working for years, just add our solar drive.
Technical Specifications
- Applicable Motor Size: 0.55Kw
- Output Voltage: 230V, 1P
- DC Volt Input: 30V – 150Vmax
- Enclosure: ABS, IP65 Weather Rating
- PV only installation. No AC or generator installation
- DC Isolation
- MC4 connectors included
Least Intervention – Maximum Running Time
Our drive powers the pump and motor under all conditions by managing the output power necessary to protect the system components from damage and only shuts down when deemed absolutely necessary. Operation is restored automatically when normal conditions return. Diagnostic indications using universal mnemonics (pictures) keeps the user informed of the system status and when intervention is required.
The Apricus-Aqua Solar Power Water Pumping System:
Does not require you to change you existing pump and motor if you already have it and it’s been working for years
Secondly does not make use of exotic motor and pump designs (low voltage or DC motors or pumps that do not have the nationwide backup support)
Thirdly it does not require a solar specialist, dealer or importer to provide you with product and expertise
Powers normal mains borehole and pressure pumps
Accommodates any normal voltage
Is serviced by the usual pump and farming industry and
Can be powered from as little as a single solar photovoltaic panel
When do I use Apricus-Aqua ?
Apricus-Aqua is used when hassle-free borehole, pressure and transfer pump operation is required, powered from the sun. It is ideally suited to replace your mains supply for your existing pump/s and water transfer requirements. Apricus-Aqua Systems is designed to be powered either from solar only or a combination of solar power, grid power and/or generator. Installation requires a minimum amount of equipment and does not require lengthy and costly borehole, swimming pool or pressure pump replacement, simply add the Apricus-Aqua System Controller.
Where do I use Apricus-Aqua ?
Apricus-Aqua is suitable for all single and three phase borehole, surface and general water pressure applications, compatible with all borehole and other water pump installations and adaptable to residential, agricultural and other pump needs where solar powered may/is required.
Why the Apricus-Aqua ?
This system works with standard equipment, including pumps, motors, switchgear, pressure switches, float switches and level control equipment. It is easy to install and operating conditions and diagnostics are visible on the simplified display, giving you peace of mind and warning you before you experience any damage or loss of water supply.
