AquaPress 3 Automatic Pump Controller
The AquaPress 3 Automatic Pump Controller automatically manages a connected water pump as demand changes throughout the water system.
Opening a tap or valve starts the pump, while closing it automatically stops normal pump operation.
Therefore, users enjoy convenient water control without repeatedly switching the connected pump on and off manually.
Constant pressure and water flow remain available while an outlet stays open during normal pump operation.
Practical Pump Management
Compact dimensions make the controller practical for installations where an unnecessarily bulky control arrangement would be inconvenient. Additionally, its operating design integrates the pump’s flow-pressure curve to help avoid unnecessary pump over-sizing.
No routine maintenance is required according to the controller’s stated operating characteristics.
Integrated Pump Protection
Built-in dry-running protection stops the connected pump whenever dry-running operation occurs within the water system. Consequently, continued dry-running operation is prevented through the controller’s integrated protection system.
Protection against water hammer also provides an important safeguard against damaging pressure effects within the installation.
Installation Protection
A special non-return valve helps protect the connected water system against pressure surges during operation. Moreover, integrated protection removes the need for separate level switches used specifically for this protective function.
The controller also provides the stated reserve against leaks within the connected installation.
AquaPress 3 Automatic Pump Controller
Control Panel
Three LED indicators provide straightforward visual information about important operating conditions during everyday pump use.
Meanwhile, the yellow POWER indicator shows electrical power, and the green LED identifies pump operation.
The red FAILURE indicator alerts users when the controller registers a failure condition.
Manual Control and Pressure Monitoring
A tactile RESET button allows users to start the connected water pump manually whenever required.
Furthermore, an integrated pressure gauge displays system pressure directly at the controller during normal operation.
These accessible controls help users check essential operating information quickly and conveniently.
Durable Component Construction
Reinforced nylon forms the water housing and provides a strong structure for the internal water-handling components.
Additionally, natural rubber forms the sealing membrane, offering flexibility with resistance to aging and corrosion.
An industrial-level circuit board manages the electronic functions required for accurate controller operation.
Meanwhile, reinforced engineering plastic surrounds the circuit board and provides a durable protective casing.
Main Features of the AquaPress 3 Automatic Pump Controller
- Automatic response to changing water demand provides convenient everyday pump management.
- Moreover, pressure and flow support continues while an outlet remains open during pump operation.
- Integrated safeguards provide important protection for both the connected pump and water installation.
- Additionally, clear status indicators make important operating conditions easy to recognize.
- Direct manual control provides convenient pump starting whenever manual activation becomes necessary.
- Compact construction combines essential pump-management functions within a practical controller design.
Technical Specifications of the AquaPress 3 Automatic Pump Controller
- Supply voltage: 230V
- Maximum current: 10A
- Frequency: 50Hz
- Protection grade: IP65
- Maximum water temperature: 60°C
- Starting pressure: 1.5–3 bar
- Maximum operating pressure: 10 bar
- Inlet connection: 25mm male
- Outlet connection: 25mm male
- Pressure gauge: Included
- Dry-running protection: Integrated
- Non-return valve: Integrated
- Manual start control: Tactile RESET button
- Status indicators: POWER, pump operation and FAILURE
