Dolphin Wave 200 Robotic Pool Cleaner
Powerful Commercial Pool Cleaning with the Dolphin Wave 200
The Dolphin Wave 200 is a professional robotic pool cleaner designed for demanding commercial environments. It provides reliable cleaning for community, fitness, resort, and public swimming pools up to 33 metres in length. Built for frequent operation, this cleaner combines intelligent navigation, powerful scrubbing, and high-capacity filtration to deliver dependable results with less manual effort.
Main Features of the Dolphin Wave 200
- Suitable for commercial pools up to 33 metres long.
- Intelligent gyroscopic navigation with an electronic compass.
- Six active brushes provide powerful scrubbing performance.
- High-capacity multi-layer filtration captures fine particles and larger debris.
- Strong suction rate of 34 m³/h for efficient debris removal.
- Plug-and-play operation for quick setup.
- Programmable cleaning cycles with cycle selection options.
- Delay start function for flexible scheduling.
- Top-loading filter system for easy maintenance.
- Reinforced transport caddy for convenient storage and transport.
- Anti-tangle swivel helps prevent cable twisting.
- Durable 35-metre floating cable.
- Interactive digital interface for simple operation.
- Automatic shut-off at the end of each cleaning cycle.
- Energy-efficient operation helps reduce water, chemical, and energy consumption.
Intelligent Cleaning Performance
The Dolphin Wave 200 uses advanced gyroscopic navigation and an electronic compass to plan efficient cleaning routes. This intelligent system helps the robot clean pool floors thoroughly while avoiding unnecessary movement. Six active brushes scrub away algae, dirt, as well as stubborn debris, leaving surfaces noticeably cleaner after every cycle.
High-Capacity Filtration
A multi-layer filtration system captures everything from fine dust to larger debris during each cleaning cycle. As a result, pool operators spend less time handling maintenance and more time focusing on their facilities. The convenient top-loading filter design allows quick access without touching collected debris. Simply remove the filter, rinse it thoroughly, and reinstall it before the next cleaning cycle.
Simple Operation
Getting started is quick and straightforward. Place the power supply at least 3.5 metres from the pool edge in a shaded location. Connect the floating cable securely, lower the robot into the middle of the pool, and allow it to sink naturally. If the model uses foam brushes, soak them completely before starting the first cleaning cycle.
Next, press the ON/OFF button on the power supply to begin cleaning. The robot automatically switches off when the selected cleaning cycle finishes. However, stopping the cleaner before the cycle ends causes it to restart the selected program from the beginning when switched on again.
Designed for Daily Commercial Use
Built to handle demanding environments, the Dolphin Wave 200 delivers reliable performance throughout repeated cleaning cycles. Its reinforced caddy makes transport and storage easier, while the anti-tangle swivel helps the cable move freely during operation. The interactive digital interface also simplifies daily use for pool maintenance teams.
Easy Maintenance and Storage
Regular maintenance helps keep the cleaner performing at its best. Remove the robot from the pool after every cleaning cycle and store it on the supplied caddy in a shaded, protected location. Carefully wrap the cable to prevent twists or kinks before storage.
Keep the power supply away from rain, direct sunlight, excessive heat, as well as freezing conditions. Position it at least 3.5 metres from the pool edge during operation. For off-season storage, keep the cleaner on its caddy in a protected area with temperatures between 5°C and 45°C.
Helpful Operating Tips for the Dolphin Wave 200
Before using the cleaner for the first time, remove any protective plastic from the white climbing rings if fitted. Release only the amount of cable needed to reach the longest section of the pool, leaving any excess cable neatly coiled outside the water. Avoid using extension cords and never pull the robot from the pool by its cable while it operates.
The Dolphin Wave 200 works best after completing seasonal pool preparation, including balancing the water, running the filtration system, and also removing large debris with a pool net. Depending on the installed filter, the cleaner can collect larger debris such as leaves and twigs or fine particles including sand and dust. Some models also include adjustable handles that help control cleaning speed near the waterline.
Technical Specifications of the Dolphin Wave 200
| Specification | Details |
|---|---|
| Maximum Pool Length | 33 m |
| Cleaning Coverage | Floor |
| Default Cycle Time | 6 Hours |
| Robot Weight | 26 kg |
| Cable Length | 35 m |
| Suction Rate | 34 m³/h |
| Filter Type | Multi-Layer |
| Filter Access | Top Access |
| Filter Full Indicator | Yes |
| Active Brush | Yes |
| Number of Brushes | 6 |
| Brush Type | Standard Brush |
| Delay Feature | Yes |
| Weekly Timer | No |
| Mobile Application | No |
| Anti-Tangle Swivel | Yes |
| Waterline Scrubbing | No |
| Enhanced Cleaning Cycles | No |
| Interactive Digital Interface | Yes |
