SSP-100 Variable Speed Pump
Benefits of SSP-100 Variable Speed Pump:
Energy Efficiency:
The variable speed drive adjusts motor speed based on demand. Therefore, the pump uses only the energy required. As a result, electricity consumption decreases. In addition, operating costs remain controlled.
Constant Water Pressure:
The pump maintains stable pressure during operation. It also eliminates fluctuations. As a result, users experience consistent shower pressure. In addition, tap flow remains smooth and steady.
Quiet Operation:
The permanent magnet motor works together with intelligent control. Therefore, noise levels are reduced. As a result, the pump runs quieter than traditional models. For this reason, it is ideal for residential environments.
Smart Operation:
The built-in controller starts and stops the pump automatically based on pressure demand. As a result, manual input is reduced. In addition, convenience is improved. Furthermore, the digital control panel allows easy pressure setting and monitoring.
Digital control panel for pressure setting and monitoring
Built-in protections:
- Dry run (water shortage)
- Over/under voltage
- Motor failure
- Sensor faults
Improved System Efficiency
The multistage design produces higher pressure. At the same time, it maintains strong hydraulic efficiency. Therefore, it performs effectively in boosting and distribution systems.
Versatile Applications
Suitable for:
- Domestic water pressure boosting
- Irrigation systems
- Water treatment and purification systems
As a result, it provides a flexible solution. Therefore, it suits both home and light commercial use.
Compact & Space-Saving
Its compact and lightweight design allows easy installation. Therefore in tight spaces, performance is not affected.
Reduced Wear & Longer Lifespan
The pump does not run at full speed continuously. Therefore, mechanical stress is reduced. As a result, service life increases. In addition, maintenance requirements are lower.
Scalability (Cascade Capability)
Multiple pumps can be connected in cascade systems. Therefore, the setup can expand easily. As a result, it supports increased water demand.
Performance & Design Features of SSP-100 Variable Speed Pump
- Multistage centrifugal design for higher pressure efficiency
- Permanent magnet motor for energy-efficient, low-noise operation
- Variable speed control for automatic pressure regulation
- Compact construction for space-saving installation
- Corrosion-resistant materials for clean water systems
Construction Highlights of SSP-100 Variable Speed Pump:
- Plastic impellers and guide vanes
- Stainless steel motor shaft
- Mechanical seal (silicon carbide/graphite)
- Integrated pressure sensor and control module
Key Technical Limitations:
- Not suitable for high-viscosity or contaminated fluids
- Must be primed before first use
- Requires proper electrical earthing and correct cable sizing
Construction Highlights of SSP-100 Variable Speed Pump:
- Plastic impellers and guide vanes
- Stainless steel motor shaft
- Mechanical seal (silicon carbide/graphite)
- Integrated pressure sensor and control module
Advanced Capability:
Supports cascade operation for higher demand systems
Technical Aspects:
Operating Conditions:
- Clean water (≤0.1% solids, <0.2 mm particles)
- Temperature range: 0°C – 80°C
- Ambient: -15°C to 40°C
- pH range: 6.5 – 8.5
Key Technical Specifications of SSP-100 Variable Speed Pump:
- Power: Up to 0.75 kW
- Voltage: 230V ±10%
- Frequency: 50 Hz
- Speed: Up to 4800 RPM
- Max Pressure: 4.5 bar
- Rated Pressure: 3.0 bar
- Max Flow: 5 500 L/h
- Rated Flow: 3 000 L/h
- 1” BSP threaded inlet/outlet
Fault & Protection System
Includes error codes:
- E-01 Dry run
- E-02 Leakage
- E-03 Motor stall
- E-11 Low voltage
- E-12 Over-temperature
- E-21 Communication failure
